Introduction
Specs
360 Systems Home
Ethernet Audio Home
Bottom Graphic


DigiCart/E
Specifications

 Audio
Audio Channels 2
Quantization 16 or 24-bit, linear PCM
Native File Formats WAV, DigiCart II Linear and Dolby AC-2
Data Reduction Optional; Dolby AC-2, 48K stereo
Bandwidth 10Hz to 21 kHz ±0.2 dB @ 48K sample rate
Sampling Frequencies 44.1K, 48K, 88.2K, 96K stereo pairs
Dynamic Range 116 dB typical
Signal-to-Noise 116 dB typical
Distortion (THD+N) <0.002%
Inter-channel Phase Deviation <0.1 degree at 15kHz
Inter-channel Crosstalk >90 dB at any frequency
Input Circuit Electronically balanced, Z=20k ohms, XLR-3 female
Common Mode Rejection Better than 60 dB @ 120 Hz
Maximum Input Level +20 dBu
Level adjustment Rear panel trim, output level
Level Metering Quasi-peak, 14-segment LED display with clip indication
Nominal Operating Level +4 dBu (provides 16 dB headroom)
Sample rate converter 24-bit, 3:1 ratio; input or output
Output Circuit Balanced, Z=100 ohms, XLR-3 male
Maximum Output Level +20 dBu
Headphones Front panel 1/4" (6.35mm) jack with  level adjustment
Digital Audio Inputs

 1.  AES/EBU, XLR-3, 110W
 2.  AES3-ID, BNC, 75W
 3.  IEC-958 type II, BNC
      (w/ RCA adapter)

Digital Audio Outputs

 1.  AES/EBU, XLR-3 female,
      110W
 2.  AES3-ID, BNC, 75W
 3.  IEC-958 type II, BNC
      (w/ RCA adapter)

Output word size conversion 24-bit to 16-bit by TPD or noise-shaping
Digital audio sync reference Internal crystal, AES-3, or AES-11 (BNC)
 General Specifications
Removable Cartridge 100 or 250 MB Zip™ magnetic disk
Internal Hard Disk 40 GB standard ATA interface
Audio Start/Restart Time Instantaneous
Display 64 x 240 pixel graphic LCD with backlight
Network connection Ethernet, 100 Base-T
File transfer to/from DigiCart II D-NET, 100 MB Zip disk
GPI Remote control Remote contacts with lamp drive; 25-pin "D" connector
9-pin Serial Remote control RS-422/485; ES-Bus or peripheral-bus interface (E-Mem)
Cue output (Secondary marker) Open collector output
Cue Erase/relocate Cue marker may be individually erased or relocated
 Hard Drive Characteristics
Hard Disk Reliability MTBF >625,000 hours (6,240 POH/year @ 35°C)
Component Life 5 years
Disk Interface Ultra-ATA/100
Error correction 288-bit Reed-Solomon ECC
Seek Errors <1 error in 106 seeks
Non-Recoverable Errors <10 errors in 1013 bits
Drive or disk Temperature 5° to 55°C (41° to 131°F)
Relative humidity, Non Condensing 10 to 85% RH
Temperature Gradient 24°C/hr Max (75°F/hr)
Altitude To 3,000 m (10,000 ft)
Shock 10 Gs 1/2 sine wave for 11 ms duration (write)
Vibration 1 G P-P at 5-300 Hz; Sinewave, 1/2-octave/min sweep
 250 MB Zip® Drive & Cartridge Characteristics
Cartridge Drive Reliability MTBF >100,000 hours
Drive Insertion/Removal Cycles 10,000 min
Disk Insertion/Removal Cycles 2,000 min
Non-Recoverable Errors <10 errors in 1013 bits
Recoverable Errors <10 errors in 109 bits
Seek Errors <1 error in 106 seeks
Drive or disk Temperature 10° to 32°C (50° to 89.6°F)
Relative humidity, Non Condensing 10 to 80%
Maximum Temperature Gradient 12°C/hr (22°F/hr)
Shock 7g 1/2 sine wave for 11 msec
Vibration 0.7g P-P at 5-17 Hz; 0.25g P-P at 17-500 Hz
 Physical/Miscellaneous
Form Factor Standard 2U 19"rack; built-in rack flanges
Dimensions (H-W-D) 3.48" x 17.00"x 12.00"(88mm x 433mm x 305mm)
Power 115/230 volts AC, 50-60 Hz, 25 watts
Cooling Fan
Net Weight 18.25 lb. (8.3 Kg)
Agency Approvals UL, C-UL, CE, FCC