DigiCart/II Audio Specifications Bandwidth 10 Hz to 20 kHz ±0.5 dB; optionally 15 kHz @ Fs=32,000 Quantization 16 bit linear Sample Frequencies 48K, 44.1K, 32K Stereo or Mono Data Reduction Selectable Dolby AC-2 48K stereo only Dynamic Range 92 dB THD+N <.005% ref. to full scale Interchannel Phase Deviation <0.1 degree at 15 kHz Interchannel Crosstalk >90 dB at any frequency Analog Input Circuit Electronically balanced with RF suppression; Input Z = 40k ohms XLR-3 type connectors CMRR >60 dB @ 120 Hz Max Input Level +21 dBu single ended +27 dBu differential max. Analog Output Circuit Phase corrected, short circuit proof RF protected differential outputs Output Z=100ohms. XLR-3 type connectors Max Output Level +16 dBu single ended +22 dBu differential Digital Inputs AES/EBU, XLR-3 type Conn., 110ohms: BNC Conn., 75 ohms; IEC 958 Type II, BNC type connector w/ RCA adapter Digital Outputs AES/EBU, XLR-3 type., 110 ohms; BNC Conn., 75 ohms; IEC 958 Type II, BNC type connector w/ RCA adapter General Specifications Networking D-NET file transfer format on AES ports Removable Cartridge Bernoulli magnetic disk cartridge 65, 105, or 150 MB capacity Cartridge Drive Reliability MTBF > 175,000 hours Cartridge Reliability Typical media lifetime > 2,500 plays Hard Disk Reliability MTBF > 250,000 hours Display 2 line x 20 character fluorescent Metering & Level Controls Quasi-peak responding LED display; controls on front panel GPI Remote Control Remote contacts with return lamp drive Serial Remote Control Full machine control via EIA-422 ES-Bus interface;9-pin D connector Cue Controls Secondary with LED; relay contacts on 9-pin D connector Cue Erase Cues may be individually erased without playing to their location Physical Dimensions 5.19" x 8.50" x 17.13" (130 x 213 x 428 mm) 3RU half-rack width Weight 18.25 lbs. (8.3 kg) Power Requirements 115/230 VAC, 50/60 Hz, 75 watts Country of Origin USA