| Matrix Size | 16x16 master switcher, expandable with 16x16 expansion units. Configurable mono, stereo or as a multi-channel system. |
| Storage programs | 100 programs stored in non-volatile memory. Programs may control individual switches or operate as salvos. |
| Bandwidth | DC to 50 kHz (-3db) |
| Distortion | Less than .008% THD + N, DC to 20 kHz @ +22 dBv |
| Signal/Noise | 105 dB unweighted referred to maximum output. |
| Noise Floor | -78 dBu (96 microvolts) |
| Crosstalk | Any channel to any other: 99dB @ 1 kHz; 83 dB @ 20kHz |
| Connectors | 56-pin ELCO 8016 with gold plated pins. Mates provided. |
| Front Panel | Input and output 8 and 19 are duplicated as single ended jacks |
| Jacks | on front panel with 12dB additional gain. Connection to front panel jack interrupts corresponding rear panel input. |
| Input | Electronically balanced with R.F. suppression. |
| Input Z | 40k ohms |
| Input Gain | Nominally 0dB; adjustable over 10 dB range |
| Maximum Input | +27 dBu |
| Common Mode | Rejection better than 55 dB (typical), DC to 20 kHz |
| Output | Phase corrected differential outputs, short circuit proof |
| Output Z | 100 ohms |
| Maximum Output | +27 dBu differential; +22 dBu single ended |
| Stability | Optimum output stage compensation with decoupling of load reactances gives excellent square wave response and stability. |
| Remote Control | Full control through EIA-422/485 or MIDI |
| Data Cable Run | Maximum length with EIA-422/485: 1,000 feet. Maximum length with MIDI: 50 feet. |
| Data Transfer | Upload/download capability of stored data via front panel or remote terminal. |
| MIDI Mapping | Eight MIDI commands on any eight MIDI channel numbers are transmitted with each selected program. Front panel enable/disable. Mapping data also transmitted on EIA-422/485. |
| Mapping Memory | Mapped MIDI commands stored in non-volatile memory. |
| Power | 97-130 volts or 200-245 volts AC, 50/60 HZ, 30 watts |
| Power Supply | Redundant power supply regulators for all supply rails. |
| Dimensions | 3.5"x19"x8" (HxWxD) including mated connectors. |
| Weight | 10 lbs net. |
| Mechanical | Constructed of 18 ga CRS, semi-gloss baked powder paint. Front panel satin finish black anodized aluminum. Lexan overlay on front panel. |
| Materials and Standards | Printed circuit cards: epoxy glass (FR-4) with 94-VO flame retardant rating. Power transformer: approval to U.L., C.S.A. and VDE standards. All AC components are U.L. recognized. |
| Origin | Made in the USA |